It’s always recommended to use a high quality antifouling system, particularly in Queensland. Warmer water promotes growth, so if you don’t use your boat (especially over summer) it won't take long for nasty growth to flourish. A clean hull means maximum speed, good fuel consumption and less hardstand time.
Film thickness plays a big part in antifouling. If the film thickness is not at specification, your boat will not travel in the water as well as it should. This is why we spray all boats with 2 coats of antifoul, plus a 3rd around the waterline leading edges and propeller area. Antifouling typically lasts 12–24 months depending on which product is chosen.
We use a range of brands to suit your requirements, including International, Ameron, Jotun, Altex, Wattyl, Newport and Hempel.
If required, we can also completely remove the old antifoul quickly and efficiently by soda stripping in an environmentally-friendly manner. Using soda stripping, an average boat is prepared one day and ready for sanding the next. A fast and efficient job means lower hardstand cost.
All of our new antifoul systems get a minimum of 3 coats of water barrier/epoxy followed by a tie coat and 2 coats of antifouling, as well as a 3rd to the water line and all leading edges and high wear areas. The epoxy system is an essential part of the process to ensure the vessel is well protected.
Whether it’s minor cosmetic damage or a larger structural modification, we ensure every repair is completed to a high structural and cosmetic standard.
Fibreglass and resin technologies have come a long way from the 70’s and 80’s. We use the latest, best and strongest resins and fibreglass cloths to repair your vessel, so you can rest assured that the job will be done correctly.
From small blistering to full-scale osmosis treatment, MarineWorks has the experience and equipment to tackle osmosis correctly.
Osmosis can significantly impact the value and condition of your vessel, and the longer you leave it the more it will cost you in the long run. Proper repair is essential to prevent ongoing issues—osmosis must be repaired properly or it will just keep on appearing.
We manage boat insurance repairs from start to finish, making the process as straightforward, time efficient and stress-free as possible.
Our team can inspect your vessel, prepare detailed quotes, and work directly with your surveyor/assessor and insurance company. Once approved, all repairs are completed to a high standard, with a focus on quality workmanship and a finish you’ll be thrilled with.
We specialise in colour matching and seamless blending, ensuring repairs integrate cleanly with existing finishes. We can recommend the best paint for your vessel, or we can use your preferred product working to your budget.
We work with leading marine products including AWLGRIP, International Paint, Alexseal, and Ameron, and collaborate closely with technical representatives to achieve the best possible finish to keep you satisfied.
Propspeed® application is critical and should always be left to a certified Propspeed® applicator like Marineworks.
Propspeed® is a terrific product for keeping your running gear clean and efficient. This specialised coating helps prevent marine growth on propellers and running gear, improving efficiency and performance.
We provide professional marine electronics installations, ensuring reliable system performance and clean integration with your vessel’s setup.
We install bow and stern thrusters to improve manoeuvrability and control, with precise installation to ensure reliable operation and long-term performance.
We use high-quality products and proven techniques to achieve a clean, polished, professional result. Our marine detailing services are tailored to your vessel’s condition, with a range of detailing options available to suit your needs including:
We offer professional restoration and protection options to maintain both the appearance and longevity of your vessel’s timber. There are two main options:
Teak is a naturally oily timber, so oiling is recommended—but if you love that classic timber shine then varnishing is for you. Both options can be professionally applied by MarineWorks.
To bring your deck back to life, surfaces will need to be sanded or washed using a teak restorer.
When sanding, remember it can only be done a few times as you are restricted to the thickness of teak. Decks can also be oiled.
Routine maintenance ensures your boat stays protected, performs efficiently, and is always ready for use. This both extends its lifespan and reduces long-term repair costs.
If you don’t have the time to manage the process or you just can’t be there, MarineWorks can coordinate the entire project for you.
We work with trusted, qualified trades to ensure all work is completed to a high professional standard. Throughout the project we will keep you informed with regular updates, including photos and direct communication, so you always know the progress of your vessel.
